VELOSTER(FS) >2013 > G 1.6 T-GDI > Engine Mechanical System > Cylinder Block > Drive Plate>Repair procedures  
Removal and Installation
1.
Remove the automatic transaxle .
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the drive plate(A).
Tightening torque :
71.5 ~ 75.5N.m (7.3 ~ 7.7kgf.m, 52.8 ~ 55.6 lb-ft)

3.
Install in the reverse order of removal.