VELOSTER(FS) >2013 > G 1.6 T-GDI > Fuel System > Fuel Delivery System > Filler-Neck Assembly>Repair procedures  
Removal
1.
Remove the rear-LH wheel, tire, and the inner wheel house.
2.
Disconnect the fuel filler hose (A), the leveling hose (B) and the ventilation hose (C).

3.
Open the fuel filler door and unfasten the filler-neck assembly mounting screw (A).

4.
Remove the filler-neck assembly from the vehicle after removing the bracket mounting bolts (A).

Installation
1.
Installation is reverse of removal.
Filler-neck assembly installation bolt:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Filler-neck assembly installation screw:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)