Body (Interior and Exterior) > Bumper > Front Bumper > Repair procedures

VELOSTER(FS) >2013 > G 1.6 T-GDI > Body (Interior and Exterior) > Bumper > Front Bumper>Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces to without marring the surface.

•	Take care not bend or scratch the cover and other parts.

1.	Loosen the radiator upper cover (A) mounting clips.

2.	After loosening the front bumper side’s mounting screw, then disconnect the side’s.

3.	Remove the front bumper lower mounting clips.

4.	Disconnect the fog lamp connector (A).

5.	Remove the front bumper.

Installation is the reverse of removal.

•	Make sure the connector is plugged in properly.

•	Replace any damage clips.