VELOSTER(FS) >2013 > G 1.6 T-GDI > Body Electrical System > Lighting System > High Mounted stop lamp>Repair procedures  
Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the tailgate center trim.
(Refer to the BD group - "Exterior - Tailgate")
3.
Loosen 4 nuts and remove the rear garnish assembly after disconnecting the connector.
4.
Loosen 5 screws and remove the garnish cover (A).

5.
Loosen 4 screws and remove the high mounted stop lamp (A).

Installation
1.
Install the high mounted stop lamp.
2.
Install the rear garnish and the tailgate trim.